

Un-matched equipment safeguard against
moisture : oxidation : corrosion :
dust
:
corrosive gases
:
pest
:
fog
: water flooding : condensation : humidity : salt water : harsh environment
Benefits
USP
Unique Features
-
TESTED & CERTIFIED
as per international standards
-
INGRESS PROTECTION
highest rating IP68 as per IEC 60029
-
ENVIRONMENTAL PROTECTION
tested as per IEC 60068
-
100% WATER DISPLACEMENT
in less than 10 seconds
-
EQUIPMENT VOLTAGE RANGE
from 3V to 20kV
-
IMMEDIATE PROTECTION
within 10 minutes after application
-
EFFECTIVE TEMPERATURE RANGE
-30°C TO 125°C
-
ELIMINATE SHORT CIRCUITS
even when the surface has been inundated
-
HIGH DI-ELECTRIC STRENGTH
> 28 kV/mm [ASTM D-149]
-
HIGH SURFACE RESISTANCE
> 30 TΩ [ASTM D-257] reduces current leakage
-
CORROSION PROTECTION
passes IS 9000 salt water test
-
EXCELLENT CAPILLARY ACTION
high degree of penetration into surface
-
STRONG IMPERMEABLE BARRIER
to liquids and gases
-
NO ADVERSE EFFECT
on plastics, rubber, glass, varnishes or metals
-
DOES NOT HARM PCBs
including board, parts or components
-
ULTRA-THIN TRANSPARENT FINISH
does not flake, peel or crack
-
EASY TO USE
available in bulk packs and aerosol cans
-
CURED COATING NOT FLAMMABLE
does not aid spread of fire
-
SOLDER & REPAIR POSSIBLE
possible on coated PCBs
-
EASY TO APPLY
by spray, brush or dip process
Comparison
multixa-m&p vs other conventional conformal coatings
Test Description | Conformal Coatings [acrylic] | Conformal Coatings [PU] | Conformal Coatings [Silicone] | multixa-m&p protective coating |
---|---|---|---|---|
Tedious Masking requirement | MUST | MUST | MUST | NOT NEEDED |
Electrical contact points | Uncoated | Uncoated | Uncoated | Coated & Protected |
Ingress Protection ratings | None | None | None | Highest - IP68 |
Burn-in Test Protection | NO | NO | NO | YES |
Applicable on all surfaces | NO | NO | NO | YES |
Heat Dissipation | Average | Average | Poor | Very Good |
Solder & Repair possible | YES | NO | NO | YES |
Water Displacement property | NO | NO | NO | YES |
Fast curing | YES | NO | NO | YES |
Heat assisted curing | Not needed | MUST | Needed | Not needed |
On site application & usage | NO | NO | NO | YES |
Field repair | Easy but costly | Difficult | Not possible | Easy & Affordable |
Protection Level | Basic | Good | Good | Multi-functional protection |
Moisture & Water Resistance | Average | Good | Average | Excellent |
Mould resistance | Excellent | Poor | Bad | Excellent |
Wear, Cracks or Chipping | Common | Common | Common | NO |
"Mass & Weight addition to circuit board" | YES | YES | YES | Negligible |
Conductive | No | No | No | YES |
Thickness (typical) in micron | 25-75 | 25-75 | 50-200 | Less than 2 micron |
Application Area
- Consumer Electronics
- Home Appliances
- Power Electronics
- Process Control
- IT Hardware
- HVAC
- Testing & Measurement
- Lighting
- Battery
- Machine Tools
- Computer Systems
- Medical Electronics
- Communication
- Industrial Electronics
- Instrumentation
- Electrical Devices
- Electrical Equipment
- IOT
- Robotics
- Transformers